Setting The Pressure; Using The Appliance; Adapters - Parkside Pak 20-Li C3 Originalbetriebsanleitung

NOTE
► The compressor will not work if the display
indicator is switched off.
NOTE
► The LED work light
you press the ON/OFF switch
illumination of the working area while inflat­
ing in low light conditions.

Setting the pressure

♦ Hold down the "+"
display flashes.
♦ Press the "+" or "–"
desired pressure.
♦ Once you see the desired pressure on the
display indicator
for about 3 seconds.
The desired pressure is now set.
NOTE
► The display indicator
compressor) switches off after around three
minutes of inactivity.
NOTE
► If you press and hold the "+"
button, the pressure changes quickly.
│ GB │ MT
■ 22
lights up as soon as
. This allows
or "–" button until the
button to set the
, do not press any button
(and also the
or "–"

Using the appliance

♦ Loosen the cap nut
completely!), twist in the compressed air hose
threaded connection
cap nut .
♦ Select the desired pressure.
♦ Push one of the supplied adapters ( ,
, , ) firmly onto the compressed air hose
adapter .
♦ Connect the adapter
to the object you want to inflate.
♦ Press the ON/OFF switch
♦ The compressor switches off automatically when
you reach the preset pressure.
♦ Pull the adapter
the now inflated item.

Adapters

Adapter
The ball needle can be used to inflate various balls.
Adapter
The Presta valve can be used for inflating bicycle
tyres.
Adapter
The Dunlop valve can be used for inflating bicycle
tyres.
Adapter
The universal adapter can be used to inflate air
mattresses or similar.
Adapter
For inflating pool toys, etc.
Adapter
The universal adapter can be used to inflate air
mattresses or similar.
(do not unscrew it
and retighten the
, , , , or
.
, , , , or
PAK 20-Li C3
, ,
out of