Herunterladen Inhalt Inhalt Diese Seite drucken

Service; Extended Safety Guidelines; Safety Instructions For Battery Chargers & Blowers - Parkside Pak 20-Li C3 Originalbetriebsanleitung

Akku-kompressor 20 v
Vorschau ausblenden Andere Handbücher für PAK 20-Li C3:
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries.
able battery from heat (for example, from
continuous exposure to sunlight), fire, water
and moisture.
There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace­
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Never try to repair damaged batteries.
Batteries should only be maintained by the
manufacturer or an approved Customer
Service Centre.

Extended safety guidelines

Do not use a damaged or modified battery.
Damaged or modified batteries may behave
unexpectedly and cause fires, explosions or
pose a risk of injury.
Do not expose a battery to fire or excessively
high temperatures. Fire or temperatures in
excess of 130°C (265°F) can cause an explo­
sion.
Follow all instructions regarding charging
and never charge the battery or the cordless
tool outside of the temperature range given in
the operating instructions. Incorrect charging
or charging outside of the permissible tempera­
ture range can destroy the battery and increase
the risk of fire.
GB │ MT
20 
Protect the recharge-
Safety instructions for battery
chargers & blowers
This appliance may be used by
children aged 8 and above and
by persons with limited physical,
sensory, or mental capabilities or
lack of experience and knowledge,
provided that they are under super­
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to play with the appliance.
Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised.
The charger is suitable for
indoor use only.
WARNING!
If the mains cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
prevent safety hazards.
PAK 20-Li C3
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

438572 2304

Inhaltsverzeichnis