Before Use; Charging The Battery Pack; Inserting/Removing The Battery Pack Into/From The Appliance - Parkside Performance Pptlba 40-Li C3 Originalbetriebsanleitung

Before use

Charging the battery pack

Always unplug the appliance before
►
you remove the battery pack from
or connect the battery pack to the
charger.
Observe the safety instructions and
►
the instructions on charging and cor-
rect use given in the operating instruc-
tions for your X20 Team series battery
and charger.
A detailed description of the charging
process and further information can
be found in these separate operating
instructions.
NOTE
The battery is partially charged. Ide-
►
ally, charge the battery completely
before use. You can charge the lith-
ium-ion battery at any time without
shortening its service life. Interrupting
the charging process does not dam-
age the battery.
Never charge the battery pack if the
►
the charge level should be checked
regularly. The optimum charge level is
between 50% and 80%. The storage
climate should be cool and dry and
the ambient temperature should be
The recommended ambient tempera-
►
ture range for using tools and batteries
If necessary, remove the battery packs
♦
2 from the appliance.
Insert one or two battery packs 2 into
♦
the dual high-speed charger r .
Insert the mains plug into the mains
♦
socket.
When charging is complete, disconnect
♦
the dual high-speed charger r from the
mains and remove the respective battery
packs 2 .
♦
r for at least 15 minutes between suc-
cessive charging sessions. Also discon-
nect the mains plug.
Inserting/removing the battery
pack into/from the appliance
Inserting the battery pack
Allow both battery packs 2 to click into
♦
Removing the battery pack
♦
Fitting/removing the blower
►
remove the batteries 2 before carry-
ing out any work on the appliance.
Never use the leaf blower without the
►
NOTE
►
individual working height using the
3 positions. You should always work
with the blower pipe 4 as close to the
ground as possible.
d and remove
2 .
GB / IE
|