Parkside Performance PPTLBA 40-Li C3 Originalbetriebsanleitung Seite 12

Do not point the appliance at people
■
during operation, especially do not point
Make sure you have secure footing
■
when working, especially on slopes. Al-
hands and only work with the harness
Do not stretch your body too far and be
■
careful not to lose your balance.
Do not use the appliance if you are tired
■
or unable to concentrate or after taking
alcohol or tablets. Take regular work
breaks. Proceed with caution when
working. Move slowly, do not run.
Using the appliance for a long time
■
can lead to vibration-related circulation
the usage duration by using appropriate
gloves or by taking regular breaks.
Avoid operating the machine in poor
■
weather conditions, especially if there is
a risk of lightning. Only work in daylight
Stop the machine and remove the bat-
■
teries from the appliance. Make sure
that all moving parts have come to a
if you will not be using the appliance,
–
wish to transport it or intend to leave it
unattended;
before clearing a blockage or blocked
–
channels;
before inspection, cleaning or other
–
work on the machine;
after contact with foreign bodies or in
–
the event of abnormal vibration.
Keep the power source clean of debris
■
and other accumulations to prevent
Do not tilt the machine while the power
■
source is running.
Do not use the appliance in closed or
■
poorly ventilated rooms.
■
In the event of an accident or malfunc-
■
appliance immediately and remove the
batteries from the appliance. To rectify
faults, read the "Troubleshooting" sec-
tion or contact our Service Centre.
Walk at walking pace, do not run.
■
Make sure you do not lose your balance,
■
and stand securely. Do not overreach.
When feeding material, never stand at
■
a higher level than the level of the ma-
If the machine becomes clogged, switch
■
batteries before clearing it of debris.
Never operate the machine with defective
■
safety devices or shields or without safe-
ty devices.
Do not transport the machine while the
■
power source is running.
Take care not to touch any moving,
■
dangerous parts before the machine has
been disconnected from the mains sup-
ply or the batteries have been removed
from the machine and the moving, dan-
gerous parts have come to a complete
standstill.
If an accident or malfunction occurs
■
during operation, the appliance must be
properly or consult a doctor.
Maintenance and storage
Regularly check the functionality and
■
integrity of the appliance to avoid danger
to the operator.
Replace worn or damaged parts for
■
safety reasons. Only use original spare
parts and accessories.
-
|
GB / IE