Opera Area Installations- Und Benutzerhandbuch Seite 67

8.5 POWER CONFLICT
• A power conflict can be caused by an unfavorable pot positioning in combination with
cooking levels which strongly differ from each other.
• Due to safety reasons, the pot with the lower power level has priority (here pot 1). The
other pot (here pot 2) can only get the same power out of the conflict coil as needed to
heat pot 1.
Example:
• Pot with power level 8 is moved close to the pot with power level 1.
• The power level of the moved pot is decreased to the max possible power level (here e.g.,
level 3).
• The slider shows the original set power level (here level 8) in red color and the maximum
possible power level (here e.g., level 3) in white color.
• The pot is displaying an exclamation mark to show that the pot has a conflict.
• Select the exclamation mark to get an info message.
• The info message opens, advising to move the pots further apart.
The same scenario will occur when moving a pot with lower power level towards
the pot of higher power level coil (here e.g. Pot 1 towards Pot 2).
Due to safety reasons the pot with the lower power level has priority.
AREA | 67