Safety Instructions; Safety Warnings - Siemens 5TC1 Serie Montageanleitung

Safety Instructions

1. Safety Warnings

For parallel connection of blind/shutter motors, the instructions of the motor
manufacturers must by all means be observed. The motors might otherwise be
irreparably damaged.
Use only blinds or roller shutters equipped with limit switches (mechanical or
electronic). Observe the instructions of the motor manufacturers.
Due to electronic interlocking of the attachment, the minimum switch-over delay is of
approx. 1 second is achieved.
Observe the instructions of the motor manufacturers as to switch-over delay and
maximum duty cycle.
The shutter control has been developed for the automatic operation of window blinds
and roller shutters. Any other use as, for instance, the control of roller shutter gates
may involve risks.
The user must exclude these risks by taking additional and suitable safety measures
(e.g. installation of light barriers).
Attention
Electrical equipment must be installed and fitted by
qualified electricians only.
The shutter control system has been developed for the
switching of blind / shutter motors. Do not use for switching
other types of loads.
GB
35