VEVOR PRO Bedienungsanleitung Seite 5

Static electricity can damage the machine's circuit board
1. connected to a good ground, to prevent electricity.
2. in the movement and storage to use anti-static items covered,
So as to avoid damage to the machine.
1. splash of sparks and arc will cause damage to
2. please wear a mask or with the edge of the glasses
Do not touch the hot workpieces by hand during welding.
To prevent the explosion: flammable, explosive products away from
the welding area.
Be careful not to be crushed and bruised while moving.
1. The electromagnetic field can affect the operator's heart,
especially if they have a pacemaker installed. Please keep away
from the machine.
2. If you need assistance operating the machine, feel free to seek
advice for life.
Please do not work for too long, will cause the machine part of the
zero parts overheating, damage the life of the machine.
Prohibit welding at high.
After completing welding, check the welded area for overheating
spatter and hot metal to prevent fires.
Note: Welder self-protection! Focus on others safe! Focus on plant safety! Pay
attention to equipment maintenance!
- 4 -