Wacom DTU-1931 Benutzerhandbuch Seite 39

When using the pen
display tablet on a
multiple monitor system,
you cannot use the pen
to control the other
monitor(s).
The line you are drawing
does not line up with the
location of the screen
cursor.
You suspect the pen
tablet preferences may
be corrupted, or want to
make certain that all
settings are at their
factory defaults.
The computer does not
go to sleep.
The screen cursor jumps
back when using your
regular mouse or
trackball.
The screen cursor
moves erratically or
jumps around on the
display screen when
another tablet is
connected to your
computer.
Set a pen button to D
ISPLAY
cycle between pen control for the DTU-1931 and your other displays.
See the electronic Software User's Manual for details on working with
D T .
ISPLAY OGGLE
You can also use your pen to control the other monitors in mouse
mode. To use mouse mode, first set the pen's DuoSwitch to M
T .... Then use the switch to toggle between pen mode and
OGGLE
mouse mode.
To function properly, some applications require that the pen is set to
pen mode. Make sure the pen has not been toggled to mouse mode.
If the pen is set to pen mode and the problem still exists, then you
may have a corrupted preferences file. Follow the instructions in the
next tip to create a new preferences file.
Delete the pen tablet preferences as follows:
Windows: Click the
START
Then select W T
ACOM ABLET
In the dialog box that appears, click on the R
F button to delete the preferences for the current user. To delete
ILE
preferences for multiple users, click on the R
F button. Note that administrator rights are required to delete
ILES
preferences for all users. Relaunch any currently open tablet-aware
applications that you may be running.
Macintosh: For a single user, delete the tablet preferences by first
choosing your H folder from the G
OME
home L folder. Within your home L
IBRARY
P folder and delete the com.wacom.wacomtablet.prefs
REFERENCES
file. Log out, then log back in. When the tablet driver loads it will
create a new preferences file with the factory defaults.
For multiple users, delete all tablet preferences by first opening the
main A folder. Then open the W
PPLICATIONS
run the R W
EMOVE ACOM
the R A P
EMOVE LL REFERENCE
restarted, creating new preferences files with the factory defaults.
Recalibrate the tablet.
Note: Do not manually remove the W
the main L P
IBRARY REFERENCE
removed when uninstalling the tablet software driver, and then only
when using the R
EMOVE
When you are not using the pen, remove it from the pen display
surface or the pen display will continue to send data, keeping the
computer awake.
When the pen is not in use, place it in the pen storage compartment,
or at some location near the pen display – but not on the display.
Leaving your pen on the display may interfere with screen cursor
positioning when using other input devices.
The tablet portion of the DTU-1931 emits electromagnetic waves at a
certain frequency. If another tablet is too closely placed to the
DTU-1931 it may interfere with screen cursor positioning. If this
occurs, move the tablet further away from the DTU-1931.
T , and then press that button to
OGGLE
icon and select A
LL
and T P
ABLET REFERENCE
EMOVE
EMOVE
menu. Then open your
O
IBRARY
ACOM
T utility. When the utility starts, click on
ABLET
F button. The tablet driver will be
ILES
T
ACOM ABLET
P folder. This file is only to be
ANES
W T utility.
ACOM ABLET
ODE
P .
ROGRAMS
F U .
ILE TILITY
M P
Y REFERENCE
A P
LL REFERENCE
folder, open the
T folder and
ABLET
. file from
PREFPANE
Troubleshooting
Page 35