Adjusting Pitch And Phase (Vga Only); Power Saving - Wacom DTU-1931 Benutzerhandbuch

ADJUSTING PITCH AND PHASE (VGA ONLY)

Some computers and video cards may not allow the auto-sync function to fully work when the
DTU-1931 is first connected. If some portion of text appears blurred, use the A
automatically synchronize to the incoming signal (see the description about auto-sync on page 24).
If the image is still blurred, adjust pitch and phase by following the procedure below. For optimum
display quality, set your video card to the DTU-1931's native resolution of 1280 x 1024.
• In the Wacom Tablet control panel, select the
C tab.
ALIBRATE
• If you are working with multiple displays,
be sure the display corresponding to the
DTU-1931 is selected in the M
• Click on the C
ALIBRATE
calibration screen.
• Using the OSD controls, open the OSD menu
and select the P
ITCH
pitch level so that the pattern of fine vertical
stripes displays evenly. (For details on
changing the OSD settings, see On Screen
Display (OSD) settings on page 24.)
• In the OSD menu, select the P
Adjust the phase level so that the adjustment
pattern shows clearly.
• After completing these adjustments, press the
E and M buttons to exit the OSD
NTER ENU
menu.
• Click on the C
ANCEL
exit the calibration screen.

POWER SAVING

The DTU-1931 conforms to VESA power saving guidelines.
When using the DTU-1931 with a Display Power Management Signaling (DPMS) compliant
computer or video card, the display will automatically comply with the below power saving
parameters.
When these power-saving functions are in effect, the screen display is darker than usual.
Computer mode
Power ON
Standby mode
Suspend mode
OFF mode
* Depending on the specifications and settings of your computer and video card, the power light may only
change to orange when in standby and suspend modes.
menu.
ONITOR
... button to activate the
option. Then adjust the
option.
HASE
button or press E to
SC
H-sync V-sync
Yes Yes
No Yes
Yes No
No No
Adjustment pattern for pitch and phase.
Video Power consumption
Active 37W, max.
Blanked 2W, max.
Blanked 2W, max.
Blanked 1W, max.
A option to
UTO DJUST
Power lamp
Blue
Blue/Orange*
Blue/Orange*
Orange
Customizing
Page 27