Wacom DTU-1931 Benutzerhandbuch Seite 19

•
As necessary, configure the display control panel settings for the proper size and color
resolution. The maximum (native) resolution of the DTU-1931 is 1280 x 1024 pixels.
The display size and color resolution may be constrained by the capabilities of your video card.
See the video card manufacturer's documentation for details.
Windows: If you are using the DTU-1931 as a secondary display, you may first need to enable
the DTU-1931 in your Display Properties control panel.
•
To fine-tune the display, refer to Adjusting the display, beginning on page 24. If using analog
(VGA) mode, see also Adjusting pitch and phase (VGA only) on page 27.
•
After the LCD monitor portion of the DTU-1931 is working to your satisfaction, move on to Step
2: Pen tablet installation to install the pen tablet portion of the DTU-1931.
•
For troubleshooting tips, see page 28.
Notes:
Each DTU-1931 LCD panel is produced under very stringent quality standards. Production techniques
cannot guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number of
pixels that show an incorrect color. See the specifications on page 44 for more information.
If an image has fine striping (such as screen stripes), it may appear to flicker or display a moiré pattern.
Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or pooling
pattern. If this occurs, use less pressure on the display screen when working with the pen.
When a still image is displayed for a long period of time, an after-image may remain for a short time.
To prevent this, Wacom recommends using a screen saver or other power management feature.
IMPORTANT: To extend the life of the backlight, set your computer's power management to
turn off the display when it is not in use for extended periods of time.
Installation
Page 15