Basic Pen Operations - Wacom DTU-1931 Benutzerhandbuch

BASIC PEN OPERATIONS

Pointing and selecting: Move the pen slightly above the DTU-1931 display
screen to position the screen cursor; you do not need to touch the display
surface. The cursor jumps to the location where you place the pen. Press the
pen tip on the display screen to make a selection.
Note: You must calibrate the pen display tablet to correctly align the screen cursor with
the pen tip. (See Calibrating the DTU-1931 on page 23.) If the screen cursor does not
jump to a position close to the pen tip when you place the pen on the display screen, then
the pen tablet driver may not be installed or is not loading. Install the pen tablet driver
software if necessary. Otherwise, see Troubleshooting, beginning on page 28.
Clicking: Tap the display screen once with the pen tip, or touch the pen to the
display screen with enough pressure to register a click.
Windows tip: To make navigating with the pen easier, configure Windows to select when
the pen is over an icon and to launch the icon with a single click. To turn on this feature,
first open a folder.
For Windows Vista, From the O
O
PTIONS
For Windows XP, from the T
G
ENERAL
Dragging: Select an object, then slide the pen tip across the display screen to
move the object.
Using the side switch: The pen may be equipped with a DuoSwitch. This switch has two
programmable functions that can be selected by rocking the switch in either direction. You can use
the DuoSwitch whenever the pen tip is within 5 mm (0.2 inch) of the display screen surface; you do
not need to touch the pen tip to the display surface in order to use the switch. By default, the upper
switch is set to D
OUBLE
Drawing and writing with pressure sensitivity: The pen responds to the nuance and inflection of
your hand movements, enabling you to create natural-looking pen and brush strokes within
applications that support this feature. To draw and write with pressure, select a pressure-sensitive
tool from your application's tool palette. As you work on the screen surface, use various amounts of
downward pressure on the tip of the pen. Press lightly for thin lines or softer color. Press harder for
thick lines or dense color.
Erasing: In supporting applications, the pen's eraser works like the eraser on a
pencil. In text applications, use the eraser to select text, then lift the eraser
from the tablet to delete the text.
Working with your DTU-1931
Page 20
. From the G
ENERAL
OOLS
tab select S -
INGLE CLICK TO OPEN AN ITEM
Double-clicking: Press the upper side switch, or quickly tap the
display screen twice in the same place with the pen tip.
Double-clicking is easier when the pen is perpendicular to the tablet
screen. See the electronic Software User's Manual for information
on fine-tuning the double-click area.
C , and the lower switch is set to R
LICK
pull-down menu choose F
RGANIZE
tab select S -
INGLE CLICK TO OPEN AN ITEM
pull-down menu choose F
(
POINT TO SELECT
C
IGHT
S
OLDER AND EARCH
(
POINT TO SELECT
O .... From the
OLDER PTIONS
).
.
LICK
).