Installation; System Requirements - Wacom DTU-1931 Benutzerhandbuch

SYSTEM REQUIREMENTS

Before installing the DTU-1931, make sure your computer meets the following minimum system
requirements:
•
PC. Windows Vista™, Vista X64, XP, or XP x64. VGA or DVI video connector, available USB
port, and CD-ROM drive.
•
Macintosh. OS X, v10.4 or greater. VGA or DVI video connector, available USB port, and
CD-ROM drive. ADC connectors require an ADC to DVI adapter, not included.
The DTU-1931 supports both analog (VGA) and digital (DVI) video signals. If updating your video
card, complete the video card hardware and software installation before connecting the DTU-1931.
If you have another display that is compatible with your video card, you can connect that display to
the card in order to verify the video card is operating correctly.
Although you can quickly connect the DTU-1931 to either a VGA or DVI video card, connecting to a
DVI video card generally results in optimum performance.
Notes:
Depending on the capabilities of your video card and operating system, you may be able to set up the
DTU-1931 as a mirrored, extended, or independent display. Refer to your video card documentation for
more information on its capabilities.
When you are working with more than one monitor, the DTU-1931 will map to the monitors based upon
how your system is configured. By default, if you are in mirror mode, the pen tablet will map to the entire
space on each monitor. See your hardware and operating system documentation for details on
configuring your computer and operating system for use with multiple monitors.
A display toggle function is available for use with multiple monitor systems. This enables you to toggle the
screen cursor between the DTU-1931 pen display and your other monitors. For more information, see the
electronic Software User's Manual.
The DTU-1931 can be used alone or with another display. You may connect a second device, such as a
monitor or LCD projector, to the DTU-1931 DVI-I
mirror the image on the DTU-1931. Complete the DTU-1931 installation before connecting a projection
device to the unit.
There are two primary steps to the installation process:
•
Step1: LCD monitor installation
•
Step 2: Pen tablet installation
Be sure to follow ALL instructions carefully.

INSTALLATION

port. When using this port, the second device will
OUT
Installation
Page 11