General Safety Instructions - Waeco PerfectCharge DC20 Montage- Und Betriebsanleitung

PerfectCharge/PerfectPower
2

General safety instructions

The manufacturer accepts no liability for damage in the following cases:
 Damage to the product resulting from mechanical influences and excess
voltage
 Alterations to the product without express permission from the manu-
facturer
 Use for purposes other than those described in the operating manual
Note the following basic safety information when using electrical devices to
protect against:
 Electric shock
 Fire hazards
 Injury
2.1 General safety
DANGER!
D
 In the event of fire, use a fire extinguisher which is suitable for
electrical devices.
WARNING!
!
 Only use the device as intended.
 Ensure that the red and black terminals never come into con-
tact.
 Disconnect the device from the mains:
– Before cleaning and maintenance
– After use
– Before changing a fuse
 If you disassemble the device:
– Detach all connections
– Make sure that no voltage is present at any of the inputs and
outputs
 The device may not be used if the device itself or the connection
cable are visibly damaged.
 If this power cable for this device is damaged, it must be
replaced by the manufacturer, customer service or a similarly
qualified person in order to prevent safety hazards.
EN
General safety instructions
23