Waeco PerfectCharge DC20 Montage- Und Betriebsanleitung Seite 27

PerfectCharge/PerfectPower
 Danger of explosions!
Never attempt to charge a frozen or defective battery.
Place the battery in a frost-free area and wait until the battery
has acclimatised to the ambient temperature. Then start the
charging process.
 Wear goggles and protective clothing when you work on
batteries. Do not touch your eyes when you are working on the
battery.
 Do not smoke and ensure that no sparks can arise in the vicinity
of the engine or battery.
NOTICE!
A
 Only use rechargeable batteries.
 Prevent any metal parts from falling on the battery. This can
cause sparks or short-circuit the battery and other electrical
parts.
 Make sure the polarity is correct when connecting the battery.
 Follow the instructions of the battery manufacturer and those of
the manufacturer of the system or vehicle in which the battery is
used.
 If you need to remove the battery, first disconnect the earth
connection. Disconnect all connections and all consumers from
the battery before removing it.
EN
General safety instructions
27