ECOVACS ROBOTICS WINBOT X Bedienungsanleitung Seite 13

Attach the Cleaning Pad (Pre-installed)
O
Spray Cleaning Solution
It is recommended to use WINBOT with WINBOT
effect on cleaning performance.
Step
Note: Do not over-spray Cleaning
driving treads to slip.
Cleaning Solution
Using other cleaning solutions
Solution as doing so may cause the
Note: Make sure the white side ofthe Cleaning Pad attaches to the fastener.
The Cleaning Pad is not completely
cover the Squeegees or Edge Detection Sensors.
from ECOVACS. Using tap water or other cleaners
could potentially void the warranty.
Step
Note: After spraying,
dry cloth
3. Operating WINBOT
square, make sure it does not
could have an adverse
BE SURE to wipe the bottom of WINBOT with a
13
EN