Assembly Steps - Vevor Rc-9001H Bedienungsanleitung

Diagram

Assembly steps

1．Install the axle into the axle hole of the frame, install 8-inch wheels on both
sides, and tighten them with M8 locking nuts
2．Unscrew the M8 butterfly nut and M8 outer hexagon screw, pull up the handle
tube, align the hole position, and reinstall the screw. Tighten the butterfly nut.
Operating instructions
Attention: Before using this device, the following protective equipment should be
worn (the entire machine does not include the following accessories):
 Protective goggles.
 Gloves.
 Anti slip shoes.
M8 external
hexagonal screw
- 10 -