VEVOR RC-9001H Bedienungsanleitung Seite 6

6．Use personal protective equipment correctly and always wear safety glasses.
Personal protective equipment includes dust masks, anti slip safety shoes, hard
cushions or thermal protective devices. Proper use of these protective equipment
will reduce the occurrence of personal injury accidents.
Use and maintenance of tools
1．Do not overuse tools and complete the corresponding work according to their
purpose. Reasonable selection of tools to complete work according to their
designed purpose will result in twice the result with half the effort and is safe.
2．If the switch of the machine cannot function properly, stop using the machine.
Any device whose switch cannot function is very dangerous and must be repaired
immediately.
3．Before adjusting, replacing accessories, or storing tools, the power must be
disconnected first. These measures can prevent the risk of accidentally operating
tools.
4．When storing electric tools, be careful not to let unrelated personnel,
especially children, have access to them. Because electric tools are very
dangerous for trained personnel.
5．Carefully maintain the tools to ensure that the cutting edge of the dredging
head is sharp. Proper maintenance and maintaining sharp edges can reduce
cable knots and make it easy to control the cables.
6．Regularly inspect the tool to see if the position of the moving parts is incorrect,
if there is any damage to the parts, or if there is any other damage that may affect
the normal use of the tool. If there is, please make sure to repair it before use.
Many accidents occur due to improper maintenance of tools.
7．Please only use recommended attachments. Accessories suitable for one tool
may be dangerous for another tool.
service
 Machine maintenance services must be provided by personnel who have
passed the manufacturer's assessment, otherwise it may lead to injury accidents.
 Please strictly follow the instructions in the operating manual to use the
machine and replace it according to the accessories specified by the
manufacturer. Otherwise, it may lead to electric shock or injury accidents.
- 5 -