Personal Safety Precautions - Vevor Rc-9001H Bedienungsanleitung

Electricity safety
 Tools with grounding protection should be inserted into sockets that comply
with grounding regulations. Do not change the plug at any time and do not use
any other adapter. If you suspect that the socket does not have grounding
protection, then you should ask a qualified electrician to inspect it. If an electrical
fault occurs, grounding protection will provide a smaller resistance, allowing the
current to directly enter the ground without passing through the operator
themselves.
 Avoid surface contact between the body and grounded objects, such as metal
pipes, radiators, metal cabinets, and refrigeration equipment. If the body comes
into contact with a grounded object, it increases the risk of electric shock.
 Do not expose electric tools to rain and humid environments, as this can
increase the risk of electric shock.
 Do not damage the power cord of the wiring board. Do not use the power cord
to drag or pull electric tools. Keep the power cord away from heat, oil, sharp
edges, or moving objects. Damaged or entangled power lines in other objects can
increase the risk of electric shock.
 Please use a suitable wiring board for outdoor work, such as a wiring board
marked with the symbol "W-A" or "W". This can reduce the occurrence of electric
shocks.

Personal safety precautions

1．When using electric tools, keep a clear mind and pay attention to the work at
hand. Do not use electric tools when fatigued or under the influence of drugs,
alcohol, or drugs. If not careful during use, it can lead to serious injury accidents.
2．Dress correctly. Do not wear loose clothing or jewelry. Keep your clothes, hair,
and gloves away from moving parts. Loose clothing, jewelry, and long hair are
easily entangled in moving parts.
3．Do not turn on the device unconsciously, make sure the switch is turned off
before inserting it into the socket. When you carry electric tools and accidentally
touch the switch with your fingers to turn it on, it can lead to safety accidents.
4．Any adjustment tools, such as wrenches, must be cleaned before the machine
starts. It is very dangerous for these tools to get caught in the moving parts of the
machine, which can easily cause personal injury accidents.
5．Maintain body balance and do not lose balance while operating the machine.
This will enable you to better control tools in unexpected situations.
- 4 -