Care And Maintenance; Cleaning; Cleaning The Grease Filter (Extraction And Circulating Air Mode) - hanseatic SY-103E11 600 Gebrauchsanleitung

Care and maintenance

Cleaning

Before cleaning the extraction hood, disconnect the mains plug. If it is
Danger!
inaccessible, isolate the power at the main fuse.
Grease deposits on the extraction hood can ignite at extreme heat.
Therefore, it is important that the surface of the extraction hood is
regularly cleaned, externally and internally.
Use a soft, moist cloth with a little washing-up liquid to wipe the surfaces. The
glass can be cleaned using commercial glass cleaner. Do not use sharp objects or
scouring powder, because the surfaces will become scratched.
Cleaning the grease filter
(extraction and circulating air mode)
Grease deposits on the extraction hood can ignite at extreme heat.
Danger!
Therefore, it is important that the grease filter is regularly cleaned/
replaced.
• Clean the metallic grease filter once a month – where necessary, more often –
in the dishwasher (up to 65 °C) or warm soapy water.
• Only reinstall the grease filter when it is completely dry.
• Handle the grease filter carefully, so that the fine mesh does not bend or kink.
1. Disconnect the mains plug or isolate at the appropriate main fuse.
2. Open the glass panel of the extracting hood.
3. Push the lock on the grease filter left and remove the grease filter carefully
downwards.
General
15
English