Operation; Control Elements - hanseatic SY-103E11 600 Gebrauchsanleitung

Operation

Control elements

1. Turn on: switch on power supply, the indicator light comes on, extraction
hood switched to standby mode. The light will go out automatically after 5
seconds without operation.
2. Illumination button „
illumination is activated. Press again and the LED-light and illumination
display will be turned off again. Repeat that.
3. High-speed button „
again and the motor will turn itself off.
4. Medium-speed button „
Press it again and the motor will turn itself off.
5. Low-speed button „
again and the motor will turn itself off.
6. High speed, medium speed and low speed cannot operate at the same time.
When extraction hood is operating at high speed, press low-speed button to
immediately switch exhaust hood to low-speed operation. When extraction
hood is operating at low speed, press high-speed button to immediately
switch extraction hood to high-speed operation; and so on.
7. Time settings button „
in operation press this button to set a time for motor operation.
If the vapours are very heavy, the fan can be operated for a few
Important!
minutes after cooking for an ideal suction / cleaning. Only operate
the fan for a fixed period, otherwise unnecessary energy will be
consumed.
Your extraction hood is fitted with two LED lamps. The lighting can be switched
Lighting
on and off independently of the operation of the fan.
1. Press to switch the lighting on.
2. Press again to switch the lighting off.
14
": Press the button, LED-light comes on and button
": Press the button for high-speed operation. Press it
": Press the button for medium-speed operation.
": Press the button for low-speed operation. Press it
": That is a 5-minute-timer. When extraction hood is
Operation