Inserting The Carbon Filters For Circulating Air Mode - hanseatic SY-103E11 600 Gebrauchsanleitung

Installation
The carbon filter (odour filter) is filled with activated carbon that reduces the

Inserting the carbon filters for circulating air mode

kitchen vapours during cooking. If used regularly, these filters should be replaced
approximately every three months (see "Care and maintenance" – Carbon filters).
1. Open the glass panel of the extracting hood.
2. Push the lock on the grease filter to the left and remove the grease filter
carefully downwards.
3. Install the carbon filters on the right and left of the motor as shown on the
right and tighten fully.
4. Insert the grease filter into the recess on the left.
5. Push the lock to the left, press the grease filter into place on the right and
release the lock. The grease filter clicks into place.
Preparation
open
close
13
English