Clock Functions - JUNO JB096B5 Benutzerinformation

Button
Heat-up indicator
When you activate an oven function, the
bars in the display

CLOCK FUNCTIONS

Clock functions table
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIMER
Setting and changing the time
After the first connection to the mains, wait
until the display shows
"12" flashes.
1. Press
or
2. Press to confirm and switch to set
the minutes.
The display shows
"00" flashes.
3. Press or
minutes.
Function
PLUS
come on one by one.
Application
To show or change the time of day. You can change the
time of day only when the appliance is off.
To set how long the appliance operates. Use only when an
oven function is set.
To set when the appliance deactivates. Use only when an
oven function is set.
To combine DURATION and END function.
Use to set a countdown time. This function has no effect
on the operation of the appliance. You can set the MINUTE
MINDER at any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance oper-
ates. It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
and "12:00".
to set the hours.
and the set hour.
to set the current
Description
To set the time.
The bars show that the oven temperature
increases or decreases.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or
the hours for DURATION time.
again
to set the minutes and
9