User Interface; Using Your Induction Hob - Pyramis Round Octa Installations-, Betriebs- Und Bedienungsanweisungen

4. USER INTERFACE

C
G
A Β
A. ON / OFF key
B. Child lock key
C. Zone selection keys
D. Power / Timer slider regulating key
E. Boost / Keep warm key
F. Timer / Pause key
G. LED Zone Indicators
H. LED Timer Indicator

5. USING YOUR INDUCTION HOB

To start cooking
key for 3 seconds. After the
1. Touch the
power is ON, the buzzer beeps once and
the symbol appears in all zone indica-
tors, entering the state of standby mode.
2. Place a suitable pan on the cooking zone
that you wish to use.
3. Make sure the bottom of the pan and the
surface of the cooking zone are clean and
dry.
4. Depending to the cooking zone the pan
is placed, select a relevant zone selection
key. The relevant symbol
5. Adjust the heat setting by touching the
slider regulating key control.
6. If you don't choose a heat setting within
1 minute, the induction hob will automat-
ically switch off and you will need to start
again at step 1.
7. You can modify the heat setting at any
time during cooking.
If the display flashes
the heat setting, this means that:
• You have not placed a pan on the correct
cooking zone or,
• The pan you are using is not suitable for
induction cooking or,
18
E F
D
will flash.
alternately with
• The pan is too small or not properly cen-
tered on the cooking zone.
No heating takes place unless there is a
suitable pan on the cooking zone. The dis-
play will automatically turn off after 1 minute
H
if no suitable pan is placed on it.
When you have finished cooking
1. Touching the relevant zone selection key
that you wish to switch off.
2. Press the
level, or press the
time, the power level will desrease to
straight away.
3. Beware of hot surfaces:
cates which cooking zone is hot to touch.
It will disappear when the surface has
cooled down to a safe temperature. It can
also be used as an energy saving function
if you want to heat further pans, use the
hotplate that is still hot.
Using the Boost function: Activation
1. Select the cooking zone by touching the
zone selection key.
2. Touching the boost control key, the rele-
vant LED zone indicator shows
power reaches Max.
Using the Boost function: Cancelation
1. Touch the relevant zone selection key that
you wish to cancel.
2. By touching the slider regulating key to
cancel the boost function the cooking
zone will revert to level 9.
3. By touching
same time the cooking zone switches off
and the boost function is canceled auto-
matically.
• The function can work in any cooking zone.
• The cooking zone returns to level 9 after
5 minutes.
-
key will desrease the power to
+ -
and
+ -
and keys together at the
at the same
symbol indi-
and the