Guide sensmart PF210 Kurzanleitung Seite 30

3.6 Settings
Click to open the hidden status bar and then click
menu.
3.7 F1/F2 accessibility buttons
1. Enter the settings menu and select F1/F2 to set the commonly used
functions.
2. If F1/F2 is set as laser ranging, turn on the "Laser ranging" in the settings
menu and back to the real-time preview interface and click F1/F2, the
device will emit a red laser dot and display the distance measured in the
center of the screen.
3. If F1/F2 is set as intelligent calibration, turn on the "Save and calibrate
intelligently (O)" in the settings menu and back to the real-time preview
interface and press the shooting button to freeze the photo, then click
for intelligent calibration and click
to enter the settings
for manual calibration.
EN CN
9