Herunterladen Diese Seite drucken

GreenWorks HT24L01-01 Bedienungshandbuch Seite 4

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 10
EN
1
DESCRIPTION
1.1
PRODUCT DESCRIPTION
This product is a battery-operated hedge trimmer with
an electric motor.
We are committed to continuously improving our
products, and reserve the right to modify the design and
appearance without prior notice.
1.2
INTENDED USE
Use the product to cut branches and twigs. Do not use
the product for other tasks.
1.3
PRODUCT OVERVIEW
Figure 1
1 Rear handle
2 Trigger
3 Front handle
4 Front handle safety
switch
5 Blades
2
GENERAL PRODUCT SAFETY
WARNINGS
Read all safety warnings, instructions,
illustrations, and specifications provided with this
product. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "product" in the warnings refers to your
mains-operated (corded) product or battery-operated
(cordless) product.
3
SAFETY
Carefully read and understand all instructions provided
in the Safety Manual.
4
OPERATION
This section describes how to operate the product.
CAREFULLY READ AND UNDERSTAND
THE SAFETY CHAPTER AND OPERATION
INSTRUCTIONS BEFORE YOU OPERATE THE
PRODUCT.
6 Guard
7 Battery compartment
8 Handle rotation latch
9 Debris sweeper
WARNING
WARNING
WARNING
English
4.1
BEFORE YOU USE THE PRODUCT
4.1.1 CONNECT THE BATTERY CHARGER
1. Connect the battery charger to the proper voltage
and frequency that is specified on the rating plate.
2. Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.2 CHARGE THE BATTERY
Refer to the Battery Charger Operator Manual for
information about how to use the battery charger.
4.1.3 BATTERY INFORMATION
Refer to the Battery Operator Manual for information
about how to use the battery.
4.1.4 CONNECT THE BATTERY TO THE
PRODUCT
Figure 2
ONLY USE Greenworks BATTERIES WITH THE
PRODUCT.
1. Make sure that the battery is fully charged.
2. Push the battery into the battery compartment. The
battery locks into position when you hear a click.
IF THE BATTERY DOES NOT FIT EASILY
INTO THE BATTERY COMPARTMENT, IT MAY
NOT BE INSTALLED CORRECTLY, WHICH CAN
CAUSE DAMAGE TO THE BATTERY AND/OR THE
PRODUCT.
3. Make sure that the battery is installed securely.
4.2
OPERATE THE PRODUCT
4.2.1 START THE PRODUCT
Figure 3
1. Hold the front handle with one hand and pull the
front handle safety switch.
2. With your other hand, hold the rear handle and pull
the trigger.
DO NOT KEEP YOUR FINGER ON THE TRIGGER
WHEN YOU MOVE THE PRODUCT TO PREVENT
ACCIDENTAL START.
4.2.2 ROTATE THE REAR HANDLE
Figure 4.
The rear handle offers 5 adjustable positions and can
rotate 180°.
4
WARNING
CAUTION
WARNING

Werbung

loading

Diese Anleitung auch für:

Htg40001