Boya Mini Benutzerhandbuch Seite 17

Place the transmitter(s) on clothes through its belt clip.
Using the receiver
Using with a camera
•
Connect the 3.5 mm TRS output on the receiver to the microphone port of a
camera using the 3.5 mm TRS to TRS audio cable provided.
Refer to the camera's accompanying user manual to start recording, then the
audio captured by the transmitter(s) will be transferred to the camera.
Using with a phone
•
The receiver can also be connected to a phone via its USB-C data port using a
correct data cable (not included), then the transmitter's audio will be transmitted
to the phone.
Start a video or audio recording application on your phone to begin recording.
Some phones may default to using their built-in microphone, so you may need to
switch to the external microphone (BOYA mini).
For BOYA mini-19 package
This package comes with three types of receivers: Lightning, USB-C, and 3.5 mm
•
TRS receiver, giving you more flexibility to choose whether to output audio to a
phone or to a camera.
If you are going to use the Lightning or USB-C receiver to output audio to a
•
phone, please refer to the instructions above under "For BOYA mini-12 package
to BOYA mini-17 package."
If you are going to use the 3.5 mm TRS receiver to output audio to a camera,
•
please refer to the instructions under "For BOYA mini-18 package."
Tips:
It is recommended to record a sample and play it back to check if the audio level
•
is acceptable before starting your actual recording.
In order to improve the recording effect in a noisy environment, it is
•
recommended to press the power button on the transmitter(s) to enable noise
reduction (this function will be enabled or disabled on both transmitters at the
17