3.5 mm TRS Output
3.
Use the included 3.5 mm TRS to TRS audio cable to connect the receiver to a
camera. Audio from the transmitter will be sent directly to the camera.
USB-C Data Port
4.
For charging the receiver. It also supports connecting to a phone to transmit the
audio recorded by the transmitter to the phone. When the receiver is connected
to the phone via this port, you can play back your recordings without the need to
unplug the receiver. This function is turned on by default.
Volume Indicators
5.
Operation
Press the volume button
Note: Volume indicators automatically turn off after 5 seconds.
Volume Button
6.
Press to adjust the volume in levels 1 to 3, with each level increasing by 6 dB.
Each time you press this button, the volume level cycles from level 1 → level 2 →
level 3.
Power Button Functions
7.
Operation
Press and hold for 2 seconds
Press once
Double press
Function
Volume level 1
Volume level 2
Volume level 3
Function
Power on/off
Select noise
reduction grade
Grade 1 (weak)
Grade 2 (medium)
Grade 3 (strong)
Select AI sound mode
Uncle voice
Female voice
Original voice
12
Volume Indicators
○ ○ ○
● ○ ○
● ● ○
Indicator 1 & 2
—
Blinking green once
Blinking green twice
Blinking green three
times
Blinking blue once
Blinking blue twice
Blinking blue three
times