Notes:
When the receiver is connected to a phone, recordings can be played back
•
without unplugging the receiver. This feature is enabled by default.
Each time the receiver is powered on, AI Sound Mode is turned off by default.
•
Noise reduction is also disabled by default. Upon first use, it is set to Grade 3.
•
This setting is saved even after power-off.
If the transmitter and receiver enter pairing mode but are not connected within 5
•
minutes, they will automatically switch to re-connection mode.
Noise reduction (on/off), noise reduction grade, and AI Sound Mode cannot be
•
adjusted while the receiver is in re-connection mode.
3. Indicator Light Guide
Status
Unpaired
Pairing
Paired successfully
Noise reduction enabled
Noise reduction grade 1 (weak)
Noise reduction grade 2 (medium)
Noise reduction grade 3 (strong)
Uncle voice mode
Female voice mode
Original voice mode
Indicator
Blinking blue
Rapid blinking blue (5 minutes)
Solid blue
Solid green
Blinking green once
Blinking green twice
Blinking green three times
Blinking blue once
Blinking blue twice
Blinking blue three times
10