Unpack The Desiccant And Place It In The Cfs - Creality Cfs Benutzerhandbuch

Unboxing

Unpack the Desiccant and Place It in the CFS

Steps:
Open the CFS:
•
o Locate the locking buckles on both sides of the CFS unit.
o Push the buckles toward the back to unlock the lid.
o Once unlocked, lift the top cover of the CFS to access the interior
compartments.
Insert the Desiccant:
•
o Identify the desiccant storage locations inside the CFS, as shown in the
illustration.
o Carefully tear off the protective film on the surface of the desiccant
packets.
o Place the desiccant into the designated storage areas.
o Ensure the desiccant is positioned properly to maintain optimal storage
conditions.
o Once the desiccant is in place, close the top cover and ensure it is securely
latched.
Tip: Removing the protective film from the desiccant packets is essential to activate their
moisture-absorbing properties. Make sure this step is completed before inserting them
into the CFS.
CFS Usage
The CFS must be connected to a printer to function properly and cannot be used as a
standalone unit.
7