Creality CFS Benutzerhandbuch Seite 3

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please visit our customer support page: www.alza.cz/EN/kontakt.
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
Notes
Use the printer only as described in this manual to prevent personal injury or
•
property damage. Operating the printer in an improper manner may lead to
unsafe conditions or equipment failure.
Do not place the printer near heat sources, flammable materials, or explosive
•
objects. We recommend positioning it in a well-ventilated, cool, and dust-free
environment to ensure safe and efficient operation.
For the best results, use Creality Hyper plastic tray series filaments, which have
•
been rigorously tested to meet high-performance standards.
Always use the power cable provided with the printer. Do not substitute it with
•
cables from other devices during installation. Ensure the power plug is securely
connected to a grounded three-prong outlet to prevent electrical hazards.
To prevent filament jams, avoid using materials such as TPU, PVA (wet), or BVOH
•
(wet) filaments, as they are not compatible with this machine.
Do not wear gloves, wraps, or loose clothing while operating the printer. Such
•
items may become caught in moving parts, causing crushing, cutting, or other
bodily injuries.
To avoid issues with the filament spool, do not use cardboard spools with
•
untreated or deformed edges, as these may lead to the spool becoming stuck
during printing.
Users must adhere to the laws and regulations of the country or region where
•
the printer is being used. Follow all professional safety guidelines, use the
equipment responsibly, and refrain from any illegal activities involving the
product. Creality is not liable for any legal consequences resulting from the
misuse of the printer.
Tip: Do not connect or disconnect any wires while the printer is powered on, as this may
damage the equipment or cause safety hazards.
3