Measuring Channel Settings - Prominent Dulcopool Montage- Und Betriebsanleitung

Operation and user interface
5.3

Measuring channel settings

Select the required measuring channel from the main screen to show this display.
This configuration of the measuring channel takes effect when you close the screen and press the
input and confirmation field. The parameters are not saved if the measuring channel configuration
screen closes when the waiting time is exceeded.
Fig. 17: Measuring channel configuration screen: Measuring channel settings
1 Measured value lower limit alarm
2 Measuring channel settings
3 Measured value upper limit alarm
4 Setpoint
32
1 2
Channel settings
7 6
5
6
7
3 4
5
Calibration
Cancel polarisation
Cancel over-metering
A2812