Vermeiren Timix SU Installationsanleitung Seite 8

3. Assembly and adjustments
CAUTION
6
Risk of injuries or damage
• Only use the settings described in this manual.
• Only use parts described in this manual.
• Only use genuine spare or replacement parts approved by Vermeiren.
•
Prevent bystanders from accessing the working area.
•
Keep the (dis)assembling area clean and tidy, to prevent falling.
• Collect all small parts in a box or bag.
• While (dis)assembling and operating the wheelchair, make sure no
objects or body parts get caught between moving parts. In particular,
pay attention to the position of the cables.
• Turn the wheelchair off before you perform any mechanical adjustments
and make sure that the free-wheel lever is in braking position.
• Make sure all screws are firmly secured before driving.
•
Software changes are only allowed if executed by skilled personnel,
taking into account the user and environment (stability, accellaration,
indoor/outdoor, etc.).
Read the user manual of this wheelchair. Be aware of the technical
4
details and limits of intended use. For more information, contact
Vermeiren.
3.1. Tools
To (dis)assemble and adjust the wheelchair, the following tools are needed:
•
Wrench no. 10 to no. 13
•
Allen key no. 4, 5, 6
• Screwdriver
Installation manual | 2025-06 8 Timix SU