Oase FiltoClear 5000 Gebrauchsanleitung Seite 42

Removing/positioning the filter cover
Removing the filter cover
How to proceed:
• Switch off the filter pump and pull the power plug of the UVC clarifier from the outlet.
• Remove all hoses from the filter cover (unscrew hose connectors).
• Undo the locking latch.
– Use flat nose pliers if the locking latch is hard to move.
• Open the clamping ring and remove the filter cover.
42
| For more information visit thelandscapestore.com.au | (02) 9161 3939 |
FCL0018