Dell PowerEdge 1750 Handbuch Seite 7

F i g u r e 1 - 2 . S C S I B a c k p l a n e B o a r d
CD drive interface
connector (CD_ROM)
If the system has an optional ROMB card installed, remove the ROMB backup battery
7
(not the ROMB card itself) to expose the ERA/O card connector.
See Figure 1-3; see also "Removing a ROMB Card" in your Installation and
Troubleshooting Guide.
Unpack the ERA/O card.
8
If you are replacing an ERA/O card, see "Removing an ERA/O Card" for removal
instructions before continuing with the next step.
diskette drive interface connector
(FLOPPY)
Installing or Replacing an ERA/O Card
handle
release latch
tabs (2)
1-3