Maintenance; General Information; Replacing The Battery; Cleaning The Instrument - Ht Instruments Hta107 Bedienungsanleitung

6. MAINTENANCE

6.1. GENERAL INFORMATION

While using and storing the instrument, carefully observe the recommendations listed in
this manual in order to prevent possible damage or danger during use. Do not use the
instrument in environments with high humidity levels or high temperatures. Do not expose
to direct sunlight. Always switch off the instrument after use. In case the instrument is not
to be used for a long time, remove the battery to avoid liquid leaks that could damage the
instrument's internal circuits.

6.2. REPLACING THE BATTERY

When the display shows symbol
Only expert technicians should perform this operation. Before carrying out
this operation, make sure you have removed the probe from the input
terminal.
1. Switch off the instrument.
2. Remove the battery compartment cover (see Fig. 1
3. Disconnect the battery from the connector.
4. Connect the new battery to the connector, and pay attention to correct polarity.
5. Restore the battery compartment cover to its position.
6. Do not scatter old batteries into the environment. Use the relevant containers for
battery disposal.

6.3. CLEANING THE INSTRUMENT

Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.

6.4. END OF LIFE

WARNING: this symbol found on the instrument indicates that the appliance, its
accessories and the battery must be collected separately and correctly disposed
of.
" " , it is necessary to replace the battery.
CAUTION
EN – 15
–
part 13).
HTA107