Herunterladen Inhalt Inhalt Diese Seite drucken

Key Irt; Key Mem/Alm; Operations With The Memory - Ht Instruments Hta107 Bedienungsanleitung

Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 61
➢ Activation of the set values of Maximum (HIGH) and Minimum (LOW) thresholds in
alarm conditions for measurements of air humidity
with in-built sensor
➢ Long pressing (>2s) for the activation of zeroing for measurements of moisture of
materials with in-built sensor
➢ Display of Maximum and Minimum values for infrared temperature measurement (IRT)
(see § 5.3)
➢ Activation of measurement of steam pressure in measuring mode Condensation (see §
5.4)
➢ Deactivation of Auto Power OFF (APO) function (see § 4.3.11)

4.3.7. Key IRT/

Pressing key IRT/
5.3). The value of temperature is shown on the secondary display and symbol
on the display. Pressing and holding key IRT/
pointer.

4.3.8. Key MEM/ALM

Pressing key MEM/ALM allows for the following operations:
➢ Saving the result in the internal memory, recalling to the display and deletion of the
memory (see § 4.3.9)
➢ Setting the values of Maximum (HIGH) and Minimum (LOW) thresholds in alarm
conditions for measurements of air humidity
materials with in-built sensor

4.3.9. Operations with the memory

The instrument allows saving measured values in its internal memory (max 20 locations),
recalling the saved data to the display and deleting the memory.
Saving measurements
1. With the result shown on the display (see Fig. 3
MEM/ALM until the instrument gives out a sound.
2. The measured value is saved in the location indicated at the bottom of the display (see
Fig. 2
part 15) and the instrument automatically shows the next available location
(see Fig. 3
right side)
"
"
MOI INT
and with external probe
"
MOI INT
allows activating the infrared temperature measurement (IRT) (see §
"
MOI INT
Fig. 3: Storage of measurement results
"
%RH
"
MOI EXT
"
(see § 5.2)
allows for the activation of the laser
"
%RH
"
(see § 5.1) and moisture of
"
and with external probe
left side), press and hold (>2s) key
EN – 6
"
and moisture of materials
"
(see § 4.3.10)
"
"
MOI EXT
"
(see § 5.2)
HTA107
"
appears
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hn000107

Inhaltsverzeichnis