Roborock Saros 10R Bedienungsanleitung Seite 16

Issue
Unable to auto-empty
Unable to wash the mop cloths
Unable to wash the mop cloths with
hot water
Unable to extend the mop cloth
The side brush is unable to extend
Unable to automatically detach/
reinstall the mop cloth mounts
Solution
• Auto-emptying is disabled. Check in-app settings.
• Dock dust container cover is not installed. Check and install.
• Auto-emptying will not be triggered if the robot returns to the dock without cleaning.
• The robot will not auto-empty after returning to the dock in DND mode. Adjust cleaning or
DND period, or start emptying manually.
• Auto-emptying will not be triggered if the robot is moved to the dock manually. Start
emptying manually.
• The battery level is lower than 10%. Charge the robot until the battery reaches 10%.
• The mop cloths will not be washed if not used.
• If the robot does not start from the dock or no dock is found on the app map, it will not
return to the dock for mop washing.
• Check clean water tank placement or refill the tank as required.
• Check dirty water tank placement or empty the tank as required.
• Check that the cleaning tray module or cleaning tray filter has been correctly installed.
• Check that Washing Water Temperature is set to Hot Water in the app.
• Check that the FlexiArm Design Extended Mopping feature is enabled in the app.
• The mop cloth will only extend along walls and certain obstacles.
• Check if the mop extension structure is stuck.
• Check that the FlexiArm Design Extended Cleaning feature is enabled in the app.
• The side brush does not extend for every corner or every time when the robot cleans along
the wall.
• Check whether the side brush is jammed.
• Check that the Auto-Detach/Reinstall Mop Cloth Mounts feature is enabled in the app.
• The Auto-Detach/Reinstall Mop Cloth Mounts feature is applicable only under specific
conditions.
• Check if the mop cloth mounts are jammed.
• Check that the mop cloth mounts are placed in the position where they were removed.
015