Create Wind Craft Bedienungsanleitung Seite 9

Pairing the controller
1. Turn on the main wall switch in the room where you have installed your fan.
2. Press the power button.
3. Then press the light on/off button for 5 seconds. When the connection is successful you
will hear a beep and the light will flash.
4. If the pairing process is not successful, please repeat the above steps again after turning
off the wall switch for at least 1 minute.
ON/OFF
Turn the ceiling fan completely on or off.
LIGHT
Turn the fan light on and off, regardless whether the fan is running or not.
FAN
Turn the fan on and off, regardless whether the light is on or not.
INCREASE/DECREASE COLOR TEMPERATURE
Switch between three available light color temperatures (warm, neutral, and cool).
PRESET COLOR TEMPERATURE
Press to return to the preset light color temperature.
NIGHT LIGHT
Switch the light to the perfect color temperature and intensity at night.
FAN OSCILLATION
Press the button to make the fan oscillate in mode natural breeze.
Press and hold to make the fan rotate 360º.
To stop rotation in the desired orientation, press the button again.
REVERSE FUNCTION
Changes the direction of rotation of the blades. fan. The winter function (turning to the right)
pushes the hot air accumulated on the ceiling downwards and the summer function (turning
to the left) generates a breeze that refreshes the environment.
FAN INTENSITY
Select the specific power according to the desired ventilation level.
INCREASE/DECREASE LIGHT INTENSITY
Increase or decrease the light intensity
TIMER
Press the button to set the automatic shutdown in 1 hour. Press and hold to set it to 2 hours.
TURN OFF SOUND
By pressing the mute button you can silence the sounds that the fan makes when any key on
the remote is pressed.
E NGLI SH
9