EuroLite AKKU IP UP-4 QCL Spot QuickDMX MK2 Bedienungsanleitung Seite 32

Thus, the wireless DMX network is set up and the spotlight is paired to the QuickDMX transmitter. The
assignment of the spotlight to the transmitter is kept memorized even after disconnecting the power supply.
Transmission modes
QuickDMX allows creating reliable point-to-point, point-to-multipoint and even multipoint-to-multipoint
installations over large distances and in any environment (please refer to the controller's documentation). A
single QuickDMX transmitter transmits all 512 DMX channels to a maximum of 512 spotlights. It is possible
to operate 6 transmitters at the same time in order to control a total of 3072 DMX channels. The maximum
range is 400 m.
Transmission 1:1
The DMX signal is fed to a transmitter which sends it via RF. A
receiver with the same transmission channel receives the RF
signal and distributes it as a DMX signal.
Transmission 1:Many
The DMX signal is fed to a transmitter which sends it via RF.
Several receivers with the same transmission channel receive
the RF signal and distribute it as a DMX signal.
Parallel Transmission
It is possible to operate 6 wireless DMX networks with 6
transmitters in parallel without mutual interference by adjusting
them to different transmission channels. The wireless DMX
networks operate independently of each other in 1:1 or 1:
many transmission modes.
TX
DMX
TX
DMX
TX
DMX
TX
DMX
32/44
00159907, Version 1.0