Herunterladen Diese Seite drucken

Spectrum NX10+ Bedienungsanleitung Seite 29

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Power-Off Conf
Power Off Configuration enables you to select if you want to power
your transmitter off with a long press or a short press with a
confirmation screen.
Flight Mode Table
Select Legacy or Updated style to define how the the flight mode
table is shown.
Audio Preferences
The Audio Preferences menu enables you to select base settings
for the the audio feedback features.
System Sounds
Scrolling to System Sounds and pressing the scroll wheel turns
sounds on (Active) or off (Inhibit).
You may disable all sounds by changing the volume to 0.
Vibrator Intensity Adjustment
Adjust this value to change the intensity of the built-in vibrator.
Volume Controls
When you select this option another screen is opened and each sub-
system has a volume setting that can be adjusted from 0–100.
Power Sounds
Select from a variety of sound options the system will play at
power up and power down.
WiFi Utilities
First start an account at SpektrumRC.com first on your PC, Mac, or
mobile device.
1. Select WiFi Utilities. The NX10+ will search for WiFi networks
in range and display connection options.
2. Select your WiFi connection. Load the SSID and password for
connection and select Connect.
3. Select Log In and fill in your account information.
4. Select Check For Updates to check for the newest updates on
your NX10+, and download them automatically.
5. If you wish to erase your registration information from your
NX10+ you may do so. Otherwise, select Log Out to resume
normal operation.
IMPORTANT: You do not need to re-enter your password every
time you log in, but if you go to the Password editor it will be
erased and you will need to re-enter it.
USB Settings
The USB Settings menu allows for setting the transmitter to Game
Controller mode and for easy access to the internal memory storage.
Setting the NX10+ to Game Controller mode puts the system into
USB HID mode, allowing for connection to compatible simulators
directly as a game controller. The system uses the active model
and disables the RF signal. Set the Mode to Inhibit to return to
normal RF function.
Select Access Internal Storage to access the internal memory
through the USB cable without transmitting an RF signal. Click the
Back button or the roller to exit and enable the RF signal.
SPEKTRUM NX10 + • TRANSMITTER INSTRUCTION MANUAL
www.modellmarkt24.ch
EN
29

Werbung

loading

Verwandte Produkte für Spectrum NX10+

Diese Anleitung auch für:

69724