Spectrum NX10+ Bedienungsanleitung Seite 11

PRE-INSTALLED BNF MODEL FILES
The NX10+ is pre-loaded with model files for many Horizon
Hobby BNF aircraft. For new product releases download the latest
selection of model files from www.HorizonHobby.cc/NXreload.
BNF: Select Add new BNF from Model Select and search for your
model. When you choose a BNF model file a new model will be
created using the preconfigured settings based on the aircraft
manual recommendations.
Template: There are generic model files available under Model
Select to cover model files that are not available in the BNF model
file list. Select Add New from Template for simple aircraft setups.
IMPORTANT: After selecting a BNF or template model file
you must follow the instructions from your aircraft manual to
complete setup prior to flight.
USB AND INTERNAL MEMORY
The internal memory may be accessed via the USB-C port on the
transmitter to enable the following tasks:
• Update Spektrum AirWare software in the transmitter
• Install/Update sound files
• Back up models for safe keeping
• Export or import model setup files for sharing with friends
• Import/Export Color Palettes
To connect to the internal memory:
1. Connect a Micro USB cable to your PC and the micro USB
connector on the back of the transmitter.
2. Power ON the transmitter, enter the system menu -> USB
storage, select Access Internal Storage, the NX10+ will
connect to your PC.
3. Complete your file transfer(s).
4. Press the Back button or the roller to exit.
5. Disconnect the USB cable from your transmitter.
EXTERNAL MEMORY CARD
Installing an External Memory Card
A micro memory card (not included) enables you to:
• Import (copy) models from any compatible* Spektrum
AirWare™ transmitter
• Export (transfer) models to any Spektrum AirWare transmitter**
• Update Spektrum AirWare software in the transmitter
• Install/Update sound files
• Back up models for safe keeping
File Compatibility
Your NX transmitter will create .NSPM type files which can be read by NX and iX Spektrum radios. See the table below for file
compatibility.
* DX, NX and iX transmitters with SPM, iSPM, and NSPM files so any transmitters compatible with those file types can be imported into an
NX transmitter.
** NX radios only export NSPM files. NSPM files may be read by any NX or IX radio. You can go from DX to NX, but not from NX to DX.
DX Series
NX Series
iX12
iX20 / iX14
SPEKTRUM NX10 + • TRANSMITTER INSTRUCTION MANUAL
www.modellmarkt24.ch
SPM (DX Radio Files)
RW
R
RW
R
To install or remove a memory card:
1. Power OFF the transmitter.
2. Press the memory card into the card opening with the card
label facing up.
IMPORTANT: Memory cards over 32gb may be used. When
cards are 32gb or smaller, they must be in FAT or FAT32
format. When larger than 32gb, the cards must be in exFAT
format. Cards must be SDHC or SDXC type. "Ultra Capacity"
(SDUC) cards are not compatible.
NSPM (NX Radio Files)
—
RW
R
R
EN
ISPM (iX Radio Files)
—
R
RW
RW
R = read; W = write
11