Before First Use - IKEA SKINANDE Bedienungsanleitung

ENGLISH

Before first use

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
When you start a programme,
the appliance can take up to 5
minutes to recharge the resin in
the water softener. It seems that
the appliance is not working. The
washing phase starts only after
this procedure is completed. The
procedure will be repeated
periodically.
The salt container
Caution! Only use salt
specifically designed for
dishwashers.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in the daily use.
Filling the salt container
1 2
3
Put 1 litre of water
in the salt container
(only for the first
time).
5
Caution! Water and salt can
come out from the salt container
when you fill it. Risk of corrosion.
To prevent this, after the
replenishment, start a
programme.
Filling the rinse aid dispenser
1
12
4
Put 1 kg of salt in
the salt container.
2