Korg CONCERT-7000 Bedienungsanleitung Seite 4

ASSEMBLING
d
Screw
C
oaaeooaa----
Screw
Opening the Keyboard Cover
• Hold the midsection when opening the cover.
• Do not apply undue stress to the cover.
• Opening the cover requires slightly more force than expected due
to the built-in shaft lock.
• Be sure to co//apæ the music stand
before closing the cover.
(for C-7000 only)
3
THE STAND
c
4
Mount
head
When doing this, make sure that the arrow on the surface of the connectors
is pointing
4
Attach panel@ to panels@ usingscrews B.
8
Insertthe joint connectors into the holeson thebackof panelsO, sliding
them in the direction
4
with screws A.
Slide main body @ from the rear toward the front, lining it up with the
4
metal catches attached to the top of panels@, then adjust the holes on
the metal catches and secure using the knob bolts. (See Fig. 4.)
head
(D Turn the adjustor on the bottom of the pedal box pedal until it touches
8
the floor, as shown in Fig. 5. If not adjusted properly, vibrations may
result.
joint connectors C onto
in the direction shown in Fig. I.
of the surface arrow, as shown in Fig. 3, then secure
Setting up the Music Stand
c
panels @ and secureusing screwsE.
(for C-7100 only)
1