Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
C-7000 Automatic
Example:
The C-7000 can be connected to the Korg SQD-8
Sequencer for automatic performances. In this case,
the two are linked by connecting two MIDl cables to
the MIDl
OUT and IN connectors
the MIDl
OUT and IN connectors
respectively. Setting the SQD-8 to the Record mode
and playing the C-7000 records the ensuing perform-
ance on the SQD-8.
Play mode will automatically play back the recorded
MIDl IN
SELECTING
MIOI/TRANSPOSE
Light
Indicator
comes
on when:
Pressing the
MIDl [TRANSPOSE
functions
of the voice selector switches and keyboard
to the ones shown in the figure above. This allows MIDl
related
modes
to be selected.
1. SelectingMIDl Channel
The MIDI feature is designed so that the sending side
always
specifies
This is so that
proper channel to receive only the desired perform-
ance
data,
and
sixteen
channels
Selecting Sending Channels
Channel
I is automatically
channel
when power
9
Performance Using Sequencer
on the C-7000 and
on the SQD-8,
Then, setting the SQD-8 to the
MIDl
OUT
THE MIDl
PIANO
I
OMNI
LOCAL
on/off
on/off
OMNI
LOCAL
is off
is off
7
911
u
16
c,
Sending Channel
switch
changes the
the channel
for
performance
the receiving side switches to the
output
the
desired
music.
can be selected.
selected for the sending
is turned
on. Other channels
performance through the C-7000.
This convenient
ample, difficult
recording
the left hand part of pieces not yet mastered can be
recorded and played back to allow you to practice
the right hand part. (For further details, see the
instruction
caooo
MODE
E.PIANO
PROGRAM
CONTROL
CHANGE
CHANGE
CANCE
L
CANCEL
PROGRAM
CONTROL
CHANGE
CHANGE
CANCEL
CANCEL
is on
is on
7911
1416
Receiving Channel
can be selected by pressing the key number on the
sending channel
above,
number,
pressed.
Selecting
Receiving
Channel 1 is automatically
data.
channel when power is turned on. Other channels
can be selected by pressing the key number on the
receiving channel keyboard,
Up to
above, that
number,
pressed. However,
received regardless of which channels are selected,
so
be
selecting
feature
has various
pieces can be played slowly when
and later played back at faster speed. Or
manual for the SQD-8 Sequencer.)
MIDl IN
MIDl OUT
SQN
Velocity
keyboard
shown
that
corresponds
to
the desired
while
the MIDI/TRANSPOSE
Channels
selected as the sending
shown in the figure
corresponds
to the desired channel
while
the MIDI/TRANSPOSE
when Omni is on, all data is
sure
to
switch
the
OMNI
channels.
uses. For ex-
B6C7
Curve Select
in the figure
channel
switch is
switch is
mode
before
Werbung
