Function Test; Technical Data - Protector Ask-6030 Bedienungsanleitung

GB
ASK-6030

FUNCTION TEST

The function test of the exhaust control
depends on the temperature at the thermal
sensor of the oven transmitter.
Temperature at Thermal Sensor < 38°C
GB
Turn the exhaust system ON while the window
is closed -> The exhaust system must start.
Open the window -> The exhaust system must
remain on.
Close the window -> The exhaust system must
remain on.
Temperature at Thermal Sensor > 38°C
Turn the exhaust system ON while the window
is closed -> The exhaust system must not start.
Open the window -> The exhaust system must
start.
Close the window -> The exhaust system must
turn off.
MEANING OF LED INDICATORS
Receiver (Central Unit)
Red blinking: Learning mode > No transmitter
paired.
Green solid: Oven transmitter paired, no
window transmitter.
Red solid: Window transmitter paired, no oven
transmitter.
Red and Green solid: Both window and oven
transmitters paired.
Green off: Oven transmitter not paired.
Red off: Window transmitter not paired.
Oven Transmitter
Off: Sleep mode.
Green blinking: Oven cooling down.
Red blinking: Oven heating up.
Battery Control LED
Blinking every 0.5 seconds: Oven transmitter
battery low.
MALFUNCTIONS
In rare cases, malfunctions may occur due to
interference from other similar wireless
devices. Typically, relocating the components
slightly will resolve the issue.

TECHNICAL DATA

Mains Voltage: 250 V ~, 50/60 Hz, approx. 1 W
Switching Capacity: 1000 W / 4A at cos phi = 1
Wireless Range: Up to 100 m
Frequency: 433.92 MHz
Transmission Power: < 5 mW
Max. Temperature at Sensor: 800°C
Protection Class: IP 20 (for dry indoor use only)
Battery (Oven Transmitter): 2x 1.5V Alkaline,
Type AA (Lifespan approx. 2 years)
22