General Information - Protector Ask-6030 Bedienungsanleitung

Thank you for purchasing the PROTECTOR
Wireless Exhaust Control
ASK-6030
The user manual is an integral part of this
device. It contains important information
on safety, usage, and disposal. Familiarize
yourself with all operating and safety
instructions before using the device. Use it
only as described and for the specified
applications. Pass all documentation along
when transferring the device to third parties.

GENERAL INFORMATION

This device can be used as an exhaust control
unit, which serves as a tool for monitoring
fresh air supply when operating an exhaust
system (such as a range hood, fan, etc.). This
device does not replace but only supports
self-monitoring to ensure fresh air supply.
The exhaust system will only activate if a
pressure balance is achieved by opening a
window or door. This ensures that additional
fresh air can be drawn from outside.
The window transmitter is equipped with
a special mechanism that generates the
required energy to send its signal. No
battery is needed for operation.
WARNING!
The roller shutter must be open when using
this device as an exhaust control to ensure
sufficient fresh air supply!
LEGEND
1 = Receiver
2 = Status LED
3 = CODE Button
4 = Transmitter
5 = Mounting Plate
6 = Tool for Pressure Switch
7 = Pressure Switch Attachment
8 = Oven Transmitter
9 = "Oven Cold" LED (Green)
10 = Battery Control LED
11 = "Oven Hot" LED (Red)
12 = Connection Screws
13 = Status Button (Oven Transmitter)
14 = Mounting Bracket
15 = Thermal Sensor
16 = Thermal Sensor Cable
17 = Pass-Through Hole (4mm)
18 = Mounting Holes (2mm)
19 = Flue Pipe
ADDING ADDITIONAL TRANSMITTERS
The device can be extended with an
additional window and oven transmitter,
allowing the exhaust system to be linked
to more than one window or oven. Each
window transmitter can activate the
exhaust system and each oven transmitter
can disable it.
17 17
ASK-6030 ASK-6030
GB GB
GB GB