VEVOR FLO300 Installationsanleitung Seite 4

Kindly Reminder
The FLO300 has been developed with the utmost care and it is tested in the
factory.Therefore, it is possible that the test water remains in the appliance.
INSTALLATION REQUIREMENTS
This appliance must be earthed.
If the supply cord is damaged, it must be replaced by a qualified person.
The cable type is SJT 18AWGx3C. The IP rating of this appliance is IPX4.
Water: The unit is gravity fed from the washing machine, shower, etc. with
a built-in pressure switch that detects the incoming waste and starts the
pump.
The outlet comes as standard with a 1-1/4" (32 mm) connection, however,
1" (28 mm) can be used with a reducer. If using bends in the connecting
pipework, ensure they are smooth curves to avoid blockages. Besides,
never use a 90-degree bent, but a 45-degree bent.
- 2 -