Ego Power+ WDV0900E Bedienungsanleitung Seite 13

FILTER MAINTENANCE
Filter Self-Cleaning System
1. Connect the vacuum hose to the suction inlet port of
the vacuum and install the other end of the hose onto
the filter self-cleaning plug (Fig. K1).
2. Install the battery pack, press the power button to
power on the machine.
3. Select desired speed mode and press the start/stop
button to turn on the machine.
4. Press the filter self-cleaning button to clean the filter
(Fig. K2).
TIPS:
To achieve the best cleaning effect, it is
recommended to select TURBO mode and press the filter
self-cleaning button five times and hold for 3 seconds
each time.
K1-1 Suction Inlet Port K1-2 Vacuum Hose
Filter Self-cleaning
K1-3 K2-1
Plug
Washing the Filter
Remove the battery pack and examine the filter by lifting
the power head assembly. If the filter is still dirty after
following the steps in the section "Filter Self-cleaning
System", remove the filter and rinse it in cold water. Allow
the filter to dry completely and reinstall it.
Replacing the Filter (Fig. L1 & Fig. L2)
WARNING:
Check the filter periodically and replace
if worn out or damaged. Using damaged filter can lead
to release of unwanted airborne contaminants from the
canister.
1. Lift the power head assembly and put it to one side
(Fig. L1).
2. Unfold the handle of the filter bracket and pull the
bracket with the filter out (Fig. L2).
3. Use a moist piece of cloth to remove any dust and
debris from the filter area.
4. Install a new or cleaned filter into the bracket.
5. Place the bracket into the filter area and fold the
handle.
L1-1 Handle L1-2 Filter Bracket
56 VOLT LITHIUM-ION CORDLESS WET/DRY VACUUM — WDV0900E
STORING THE VACUUM
1. Remove the battery pack from the vacuum.
2. Clean the vacuum thoroughly before storing it.
3. Store the vacuum in a dry, well-ventilated area,
PROTECTING THE ENVIRONMENT
Filter Self-Cleaning
Button
locked-up or up high, out of the reach of children.
Do not store the vacuum on or adjacent to fertilizers,
gasoline, or other chemicals.
Do not dispose of electrical equipment,
used battery and charger into household
waste! Take this product to an authorized
recycler and make it available for separate
collection. Electric tools must be returned
to an environmentally compatible recycling
facility.
EN
13