Operation - Steinbach Poolrunner One Rxb 150 Originalbetriebsanleitung

Assembling the handle
Please note that the right to return the device expires once the outer handle
clicked into place.
1. Attach the inner handle
of the robot.
2. Screw the inner handle
using the screws
3. Snap the outer handle
hear a click.
The handle is mounted.
Attaching the cleaning strips
1. Insert the cleaning strips
channels on the bottom of the bottom part
2. Make sure that the cleaning strips
properly engaged and have a tight fit.
The cleaning strips are attached.

Operation

Hair or clothing can be sucked in or trapped by the cleaning element, hold persons under
water and, in extreme cases, prevent them from resurfacing.
- Never operate the device while there are persons in the pool.
- Prevent any access to the pool as long as the device is in operation.
Check the following before each use:
- Is there visible damage on the device?
- Is there visible damage on the control elements?
- Do all individual parts function?
- Are the accessories in perfect condition?
- Are all cables in perfect condition?
Do not start up a damaged device or damaged accessories. Have them checked by the manufacturer or
its customer service or a qualified service technician.
to the upper part
3
to the upper part
3
.
2
into place until you
1
into the suction
7
have
7
Do not operate while swimming! Mortal danger!
4
3
4
4
.
6
6
7
WARNING!
has
1
1
2
3
4
23