Basic Settings - Steinbach Poolrunner One Rxb 150 Originalbetriebsanleitung

Incorrect charging and discharging can significantly impair the performance of the
rechargeable battery.
- Charge the rechargeable battery completely before using the device for the first time.
- Recharge the drained rechargeable battery completely within 12 hours.
- Fully recharge the rechargeable battery at least once every three months, even if the
device was not used during this time.
Charging the rechargeable battery in a wet or moist charging socket leads to corrosion of the
contacts.
- Only connect the charger to the device if the charging socket is dry.
The handle might become damaged if the device is stored on its head.
- Never set down the device on its head.
Charging process
1. Switch off the device before charging.
2. Connect the charger to the device.
3. Plug the charger into a socket.
The charge control indicator is lit red. The
rechargeable battery is charging.
4. When the charge control indicator is lit green,
disconnect the charger from the power supply
and the device.
The rechargeable battery is charged.

Basic settings

Adjusting the wheels
You can adapt the working radius by adjusting the wheels. The markings A, B, C are shown symbolically
in the sketch.
We recommend the following settings:
C-A: Setting for most pools (standard setting)
B-C: Setting for large pools
B-A: Setting for small pools
1. Press the retaining lug away from the half axle
and pull off the wheel.
2. Insert in the wheel with the catch so that it
snaps into place at the respective letter for the
selected setting.
The wheels are set.
22
NOTICE!
NOTICE!
NOTICE!
1
2